Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Capitol Hill Homeowners
Leaky ducts are the quiet reason a Capitol Hill home feels drafty, dusty and expensive to heat. When seams split and joints pull apart, the air you paid to condition escapes into crawlspaces and attics before it ever reaches a bedroom. We fix that at the source. Our technicians have up to 13 years of experience diagnosing and sealing duct systems, and we bring professional-grade equipment from Rotobrush and Nikro to every job instead of the shop vacuum a generalist might carry. We treat duct repair and sealing as its own discipline, not an add-on to a tune-up. One flat price per system, agreed before work starts, with before-and-after photos of your own ducts so you can see what changed. For same-day scheduling in Capitol Hill, call (855) 970-9419.
Key Takeaways
- We fix leaks, disconnected runs and crushed flex duct, not just surface dust.
- One flat price per system is agreed before work begins, and we document it with photos.
- Our technicians have up to 13 years of experience with residential duct systems.
- Every estimate is free and sets the final price in writing.
What Our Duct Repair & Sealing Service Includes
Duct work fails in predictable ways, and each failure gets its own approach. Here is what we actually do under each part of the service.
Duct Sealing
Duct sealing closes the gaps that let conditioned air leak out of the system before it reaches a room. We seal joints, seams and penetrations on the supply and return sides, which is where most homes lose the largest share of airflow. You need it when rooms feel uneven, when the system runs long without satisfying the thermostat, or when dust keeps settling on surfaces right after cleaning. We use professional sealants rated for duct surfaces and confirm the seal with airflow readings rather than a visual glance. Clean ducts are only half the job; sealed ducts keep them clean.

Flex Duct Repair
Flex duct is common in attics and crawlspaces, and it tears, sags and pulls loose at the collar more easily than rigid metal. We repair damaged sections, re-secure connections at the boot and plenum, and correct runs that were stretched too tight or kinked around a corner. It matters because a crushed flex run can cut airflow to a room almost entirely. We bring Nikro equipment to assess the run and replace or re-support the section where repair makes more sense than a patch.

Metal Duct Repair
Metal duct is durable but not indestructible; seams open, fasteners back out and sections separate at joints over time. We repair separated joints, re-secure loose sections and address crushed or dented runs in accessible chases and attics. Homes with older galvanized duct often have the worst leakage at these seams. We inspect the accessible system, document what we find and repair what a generalist would typically overlook.

Duct Insulation
Bare duct running through an unconditioned attic or crawlspace loses heat before it arrives. We add or replace duct insulation where it has sagged, torn or been compressed against a joist. Insulation matters most in older Capitol Hill homes with attic runs exposed to temperature swings. We match insulation to the duct type and climate exposure of the run, and we seal the duct first so the insulation isn’t wrapping a leak.
Mastic Sealant
Mastic sealant is a brush-applied compound that bonds to metal and stays flexible, which makes it the standard for sealing rigid duct joints. We use it at seams, collars and plenum connections where tape alone fails over time. You benefit because mastic holds up through seasonal expansion and contraction that peels ordinary duct tape within a year. This is one of the reasons sealed systems stay sealed.
Air Leak Repair
Air leak repair targets the specific gaps our diagnostics find, including leaks at the air handler, plenum and register boots that a surface inspection misses. We locate leaks with airflow and pressure measurements before touching a single seam. It matters because guessing wastes money; sealing the wrong joint does nothing for the room that stays cold. We address the leaks that actually affect your energy use and comfort, then document the repair with before-and-after photos.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
We work on the duct systems and air quality components behind the brands most Capitol Hill homes already have. With Honeywell controls and Aprilaire air quality products, we know where the connections to the duct system wear out and how a sealed system supports the equipment feeding it. Our repair work is designed to complement the hardware already installed, not replace it.
We also use Abatement Technologies air filtration equipment on jobs where contamination control matters during repair, so dust and debris stay contained rather than spreading through the house. We don’t manufacture or sell any of these brands, and we aren’t a dealer for them; we service the systems they support. Whether you have Aprilaire, Honeywell or any other make, we can help.
Signs You Need Duct Repair & Sealing Right Now
- Uneven room temperatures. A room that stays cold while the rest of the house is comfortable often signals a leaking or disconnected duct run feeding it. Sealing that run is usually cheaper than running the system harder to compensate.
- Dust settling right after cleaning. If surfaces collect dust again within days of a cleaning, air is likely pulling debris in through gaps in the return side. A leak on the return side can also draw attic or crawlspace air into the system.
- Rising energy bills with no other explanation. Leaky ducts lose conditioned air before it reaches living space, so the system runs longer to hit the same temperature. Sealing directly addresses that loss rather than just masking the symptom.
- Visible torn, crushed or disconnected duct. Flex runs that sag, tear or pull loose at the collar deliver almost nothing to the room they serve. This is common in attic and crawlspace runs and is worth repairing before it worsens.
- Musty or stale air in some rooms. A duct that has separated from its boot can pull crawlspace or attic air into a room. That smell is a sign the system is drawing air from the wrong place, and repair usually resolves it.
Our Duct Repair & Sealing Process – Step by Step
- 1
Inspection and air pressure testing. We start by mapping the accessible system and measuring leakage with airflow readings, so we know exactly where the loss is happening instead of guessing. This also tells us whether repair or replacement makes more sense for a given run.
- 2
Contamination control during the work. Before opening any duct, we set up Abatement Technologies filtration equipment to keep dust contained. This is a remediation-class standard typically associated with restoration work, and it keeps the repair from becoming a mess elsewhere in the house.
- 3
Repair of the damaged sections. We repair or replace torn flex, re-secure separated metal joints and correct crushed runs, using materials matched to the duct type. Every repair is done so the seal survives seasonal expansion and contraction, not just the day of the job.
- 4
Sealing with mastic and professional sealant. We seal the repaired joints and the additional leaks the pressure test found, using mastic on rigid seams and appropriate sealant on flex connections. This is where the energy savings actually come from.
- 5
Verification and documentation. We re-measure airflow to confirm the repair worked and document it with before-and-after photos of your own ducts. You see exactly what was done and what changed.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Capitol Hill?
Duct repair and sealing in Capitol Hill typically runs $350 to $1,200 for a residential system, depending on how much duct is accessible and how many leaks need sealing. A single flex duct repair often falls near the lower end, while a full-system seal with insulation work on attic runs trends toward the higher end. These are estimated ranges only; the written estimate you receive sets the final price.
What moves the price is access, the material involved, and how much of the system needs attention. A crawlspace job takes longer than an accessible basement run, and metal duct repair generally costs more than a straightforward flex repair. Duct insulation adds to the total when runs are bare or badly sagged.
To avoid overpaying, insist on a whole-system price rather than a per-vent charge, and ask for the before-and-after photos up front. Our estimate is free, includes a walkthrough of what we find, and comes with one flat price per system, agreed before anything starts. Call (855) 970-9419 for an exact quote.
- Single flex duct repair: roughly $350 – $600, depending on access.
- Targeted air leak repair: roughly $400 – $750 for the affected runs.
- Full-system duct sealing: roughly $600 – $1,200 for a typical house.
- Duct insulation on attic or crawlspace runs: added to the base repair.
Duct Repair & Sealing Near Capitol Hill – Our Service Area
We serve Capitol Hill and the surrounding Seattle neighborhoods, including Madison Park, Queen Anne, Laurelhurst, Fremont, Wallingford, Green Lake, Ravenna, Wedgwood, View Ridge, Maple Leaf and Medina. Scheduling is confirmed when you call, and we work Sunday through Friday with fast dispatch from 7am to 7pm. If you’re outside Capitol Hill, our duct repair & sealing and duct repair & sealing pages cover those areas, and our air duct cleaning in Capitol Hill page explains how we approach the full system.
Serving Capitol Hill, WA – Our Local Coverage Area
We serve Capitol Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Capitol Hill
Duct repair and sealing is the process of fixing damaged or disconnected duct runs and closing the leaks that let conditioned air escape before it reaches a room. It’s different from duct cleaning, which removes dust and debris; repair and sealing fix the physical system so cleaning holds. We combine both because clean ducts are only half the job.
Most residential jobs take between two and five hours, depending on how much duct is accessible and how many leaks need sealing. A single flex repair might finish in a couple of hours, while a full-system seal with insulation work takes longer. We confirm the expected time when you call.
Most Capitol Hill homes fall between $350 and $1,200 depending on the scope of repair and sealing needed. A single flex repair sits near the lower end, and a full-system seal with insulation trends higher. Our written estimate sets the final price, and the estimate itself is free. Call (855) 970-9419 for an exact quote.
Yes, we service ducts and air quality systems connected to Honeywell and Aprilaire equipment, along with other makes. We know where those connections to the duct system tend to wear out and how sealing affects the equipment feeding them. We aren’t a dealer for those brands and don’t claim to stock their parts. Whether you have either brand or something else, we can help.
Same-day scheduling is available in Capitol Hill when our route allows. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
We don’t quote a specific written warranty because our policy isn’t confirmed for this page. Ask us about it when you call, and we’ll tell you exactly what’s covered on your repair. What we do commit to is one flat price agreed before work starts and before-and-after photos of your own system.
Clear access to your attic hatch, crawlspace entry and any utility closet with an air handler before we arrive. That alone saves time on the walkthrough. Move any valuables away from the work area and let us know if you’ve recently had the ducts cleaned, since sealing is often best done right after cleaning. Then call (855) 970-9419 to confirm your appointment.
Schedule Your Duct Repair & Sealing Service in Capitol Hill Today
If your Capitol Hill home has cold rooms, dust that returns fast or a duct system in need of repair, get a professional assessment before another heating season passes. We fix the system, not just the surface, using the professional equipment generalist HVAC crews don’t bring. The estimate is free and there’s no obligation. Call (855) 970-9419. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Capitol Hill.