Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Maple Leaf
If your dryer takes two cycles to finish a load, the problem is usually the vent, not the machine. Maple Leaf is a nearly fully built-out North Seattle neighborhood of mid-century and post-war single-family homes, and the dryer runs inside those houses tend to be long, tucked into tight laundry alcoves, and years overdue for a real cleaning. We work on that exact kind of system. Our dryer vent cleaning team treats the whole run, from the machine connection to the exterior termination, because that’s where lint actually collects. Call (855) 970-9419 for a free estimate.
Why Maple Leaf Homeowners Call Air Duct Cleaning Capitol Hill for Dryer Vent Cleaning
Maple Leaf homeowners call us because we show up with professional-grade equipment instead of a shop vacuum and a brush. Our technicians have up to 13 years of experience, and the tools they use are purpose-built for duct and vent work: Rotobrush and Nikro systems for agitation and extraction, and Abatement Technologies air filtration for contamination control during the job. That combination matters in an older home, where loosening a packed lint column without controlling the dust just moves the problem into your laundry room.
Local knowledge is the other reason. We know Maple Leaf’s mature tree canopy, its laundry alcoves, and the way its crawlspace and basement duct runs behave after a long damp season. When we inspect a vent here, we’re looking at the same failure points neighbors describe to each other over the fence: a crushed flex run behind the dryer, a cap packed with fir needles, a termination that hasn’t been opened in years. That’s the lens we bring to every call.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often available when you call in the morning.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Dryer Vent Cleaning Services in Maple Leaf
Dryer vent work is one of the leading causes of residential fires when it’s neglected, which is why we treat it as a standalone safety service rather than an add-on to an air duct job. Here’s what each part of the work involves in a Maple Leaf home.
Dryer Vent Inspection
Every job starts with a camera inspection of the full run, not just a peek behind the dryer. In Maple Leaf’s bungalows and post-war ranches, that run often disappears into a wall, drops through a crawlspace, or turns a corner inside a finished basement ceiling, and the only way to know what’s in there is to look. The inspection tells us whether the duct is clear, crushed, disconnected, or carrying rodent debris before we touch anything. A vent that looks fine at the flap can be half-plugged twenty feet in.

Vent Cleaning
Once we know the layout, we clean the whole pathway with agitation tools and negative pressure, pulling lint, seed litter, and debris out of the run rather than pushing it toward the wall. In Maple Leaf, that frequently means clearing fir needles and maple seeds from the exterior termination first, then working back toward the machine. We photograph the before and after so you can see what came out of your own vent.

Lint Removal
Lint is the fuel in a dryer vent fire, and it packs hardest at the points where the duct bends or sags. In a tight mid-century laundry alcove, the foil or vinyl flex behind the machine is often crushed against the wall, and lint builds up there long before it ever reaches the cap. Removing it means working the full length of the duct, not just vacuuming what’s visible from either end.

Vent Rerouting
Sometimes cleaning isn’t the fix. If a Maple Leaf home has a long, sagging, or convoluted run to an exterior wall, rerouting it to a shorter, straighter path with proper support and a clean rise to the termination solves the clogging at the source. This is common in older homes that have been expanded or remodeled, where an addition turned a short run into a long one. We’ll tell you honestly when rerouting makes more sense than another cleaning.
Trusted Brands We Service in Maple Leaf
The equipment we bring is the proof that this is a specialist’s job. Rotobrush and Nikro systems are what commercial contractors use to clean ductwork, and Abatement Technologies filtration gear is the standard you’d expect from restoration and remediation professionals. We don’t sell or manufacture these products; we rely on them because they do the work that consumer tools can’t. When we add or replace air quality hardware, it’s from Aprilaire or Honeywell, matched to what your system actually needs. If a job calls for a part we don’t carry, we’ll tell you what’s required and get it sourced quickly.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Maple Leaf Homes
- Foil or vinyl flex crushed behind the dryer. Tight mid-century laundry alcoves squeeze the flex run against the wall, trapping lint well before it reaches the wall cap. It’s one of the most common causes of a dryer that suddenly stops drying in two cycles.
- Exterior vent caps packed with canopy debris. Maple Leaf’s dense Douglas fir, bigleaf maple, and cedar canopy drops needles, seeds, and leaf litter directly onto wall terminations. The flap may still move, but the run behind it can be plugged solid.
- Long, poorly supported runs through damp crawlspaces and finished basements. The neighborhood’s long damp season means condensation and rodent activity can degrade the duct itself, adding debris to the lint pathway. A run that sags in a crawlspace collects moisture and lint in the same low spot.
- Disconnected or separated duct joints. Older sheet-metal runs in 1920s-1950s homes sometimes come apart at a joint behind a wall or ceiling. That dumps lint and warm, moist air into a cavity instead of outside, and it needs to be found and reconnected, not just cleaned.
Pricing for Dryer Vent Cleaning in Maple Leaf, WA
Pricing is set per job by a written estimate, and the estimate is free. A typical dryer vent cleaning in Maple Leaf runs $150 to $275 for a standard single-family run, and that includes the camera inspection. If the run needs rerouting to a shorter, straighter path, expect $350 to $650 depending on length and how much wall or crawlspace work is involved. Replacing a damaged cap or adding a bird guard usually adds $75 to $175. Long basement or crawlspace runs, heavy canopy debris at the termination, and disconnected joints are the factors that push a job toward the higher end. You’ll see the number in writing before any work starts.
We Also Serve Cities Near Maple Leaf
We work throughout the neighborhoods around Maple Leaf, including Ravenna, View Ridge, Wedgwood, and Green Lake. If you’re just outside the neighborhood line, call and we’ll confirm coverage. Serving Maple Leaf and the surrounding North Seattle area is a regular part of our week, and the same equipment and inspection process come with every job.
Serving Maple Leaf, WA – Our Local Coverage Area
We serve Maple Leaf and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Maple Leaf
It’s the tree canopy. Maple Leaf’s mature Douglas fir, bigleaf maple, and cedar drop needles, seeds, and leaf litter directly onto exterior vent caps and wall terminations, so the outside end packs up faster than it would on a more open lot. That debris builds behind the flap and pushes lint back into the run. The fix is regular cleaning of the full pathway, not just the cap. Call (855) 970-9419 for an exact quote – estimates are free.
Most long runs can be cleaned, but a camera inspection decides it. If the run is intact and properly supported, we clean the full length with agitation tools and negative pressure. If it’s crushed, sagging, or routed through a tight sequence of turns, rerouting to a shorter and straighter path is usually the better long-term answer. We’ll show you what the camera sees and give you both options in writing.
Clothes that take two cycles, a dryer that gets hot on the outside, a burning or musty smell, and lint collecting around the wall cap all point to the vent rather than the machine. If the lint trap is clean and the load still comes out damp, the restriction is almost certainly in the run. A camera inspection confirms it in minutes. Call (855) 970-9419 to book one.
Often yes, because the long damp season here affects those runs differently. Condensation and rodent activity can degrade the duct material and add debris to the lint pathway, and a sagging low spot collects both moisture and lint. We check the support, the joints, and the material condition during the inspection, then recommend cleaning, re-supporting, or replacing a section if that’s what it needs. The written estimate covers the whole job.
Yes, and in Maple Leaf it’s often worth doing in the same visit. A damaged or oversized cap lets canopy debris and birds straight into the run, and a properly fitted cap with a bird guard keeps fir needles and maple seeds from packing the termination the way they do now. Replacing the cap and guard alongside a cleaning usually adds $75 to $175. Call (855) 970-9419 for a free estimate.
Dryer vent cleaning in Maple Leaf comes down to the same things every time: the full run, the exterior termination, and the condition of the duct in between. If your dryer is taking longer than it should, call Air Duct Cleaning Capitol Hill at (855) 970-9419 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Capitol Hill.